Hydraulic Pipe Bender A new type of elbow tool with bent pipe function and top function. With reasonable structure, safe use, convenient operation, reasonable price, Hydraulic Pipe Bending Machine fast loading and unloading, easy to carry, more than one machine With many advantages, in the domestic hydraulic pipe bender in the city to occupy a large share, mainly used in factories, warehouses, docks, construction, railways, automobiles and other installation pipeline and repair.
Note that the use of hydraulic pipe bender design and piping to avoid large arcs, arbitrary curves, Hydraulic Pipe Bending Machine composite bends and more than 180. Arc. The large arc not only makes the frock bulky, And it is limited by the size of the machine tool of the hydraulic pipe bender.
The hydraulic pipe Bender uses the principle of the die-forming technology and the hydraulic servo control technology, uses the industrial control juice machine to carry on the pipe tube radian design and the curved pipe control, by the computer generation curved pipe curve data, controls Hydraulic servo system for bending pipe processing. Hydraulic Pipe Bending Machine Completely changed the traditional hand-made or imitation processing vehicle skeleton arc bar parts processing, to overcome and out of the use of mold processing defects and limitations , and the curved pipe curve is flexible and easy to modify, especially to revise the bending radian according to the rebound amount of the pipe, Hydraulic Pipe Bending Machine which greatly improves the production efficiency and the processing precision.
Arbitrary curve, composite bending design is unreasonable, greatly hinder the mechanization, automation production, so that operators are difficult to get rid of bulky manual labor; more than 180. The arc of the hydraulic bending The tube machine cannot unload the mold. The hydraulic pipe Bender adopts NC control system and PLC control system, according to the different industry use environment to choose the model size, Hydraulic Pipe Bending Machine the general furniture manufacturing industry, the use of Hydraulic pipe Bender Mostly to DW38NC single head hydraulic bending machine and DW50NC this two, and the use of the two-head hydraulic pipe Bender Model SW38NC this, Hydraulic Pipe Bending Machine U-bend molding not only to enhance the bending of the Tube The efficiency of the pipe tube flatness is also very good guarantee.
Operation requirements of hydraulic pipe bender
According to the specified shear plate thickness, adjust the hydraulic pipe bender scissors gap. It is not allowed to cut 2 kinds of sheets with different specifications and different materials at the same time; Cut sheets require surface flat No shearing is allowed to tighten the narrower sheet material.
The operator of the hydraulic pipe Bender should keep the distance of 200mm away from the scissors mouth and leave the clamping device. The protective fence placed on the trigger cannot be blocked by the operator's eye.
Cutting parts. The waste produced after the operation angular, the author should be removed in time to prevent stab wounds and cut.
The clearance between the cutter plate shall be adjusted according to the thickness of the sheet, but not more than 1/30 of the plate. Hydraulic Pipe Bending Machine The knife plate should be firmly fastened, the upper and the lower side of the board to maintain parallel, after the application of the manual test, to Avoid accidents.