Home > News > Content
Bending Machine Operating Procedures
Mar 04, 2017

1, the machine must be a good grounding, the conductor shall not be less than 4mm2 copper cord. Do not allow access to more than the specified range of power supply voltage, can not plug the plug, can not test the control circuit with megger, or it may damage the device. The following are the same as the "

2, in the plug connector, can not pull the wire or cable to prevent welding pull off. The following are the same as the "

3, close to the switch, the encoder can not use hard objects impact. The following are the same as the "

4, can not use sharp objects collision display unit. The following are the same as the "

5, the electrical box must be placed in a ventilated place, prohibited in the dust and corrosive gases work. The following are the same as the "

6, not unauthorized installation, change PC input and output. The following are the same as the "

7, switch the machine power must be re-confirmed when the motor steering. The following are the same as the "

8, the machine should be kept clean, in particular, should pay attention to clamping blocks, sliders and other sliding groove should not have foreign body. The following are the same as the "

9, regularly in the chain and other sliding parts plus lubricating oil. The following are the same as the "

10, in the cleaning and maintenance must be disconnected from the power supply. The following are the same as the "

11, before driving to prepare: check the fuel tank oil level is to the oil level line, the lubrication point of the fuel, start to confirm the motor steering, check the pump with or without abnormal sound, check the hydraulic system after the oil system leak phenomenon (angle encoder is not allowed Refueling);

12, the pressure adjustment: the use of electromagnetic relief valve to adjust the pressure to ensure that the system pressure to the required working pressure, generally not higher than 12.5Mpa.


Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Detsch
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Product
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Copyright © Anhui Detsch Group Technology Co.,Ltd All Rights Reserved.